Application Description

Clear BMW fault codes and perform DPF diagnostics

bimmer-tool enables reading & clearing fault codes, initiating DPF regeneration, monitoring engine live data, and more for BMW vehicles.

For pre-2008 models, functionality is limited - we recommend using K+DCan USB cable connections. Wireless ELM adapters may not support all features on older vehicles.

Important: A quality OBD adapter is required. We recommend these:

• Vgate vLinker MC/FS/BM/FD (https://www.vgatemall.com/products/)
• UniCarScan UCSI-2000/USCI-2100 (Configure in D-CAN MODE2) (https://www.wgsoft.de/shop/)
• Carista (https://caristaapp.com/adapter)
• Veepeak OBDCheck BLE (https://www.veepeak.com/product/obdcheck-ble)

Key features:

• DPF regeneration status monitoring and detailed analysis
• Manual DPF regeneration initiation
• DPF adaptation reset (essential after filter replacement)
• Exhaust pressure measurement
• Injection system diagnostics
• Comprehensive sensor data logging (MAF, MAP, fuel pressure)
• CSV data logging for professional analysis
• Battery registration service
• Warning light reset functionality
• Service interval reset

Supported adapters:

• K+D-CAN USB (Most reliable option - requires USB-OTG cable)
• ENET cable/WiFi (Recommended for F & G series)
• ELM327 Bluetooth (Genuine units only - slower than wired)
• ELM327 WiFi (Requires mobile data disabled during use)

Getting started:

1. Connect adapter to OBD-II port
2. Switch ignition on
3. Pair your device:
   • USB: Connect via OTG cable
   • Bluetooth: Pair (PIN typically 0000/1234)
   • WiFi: Disable mobile data, connect to adapter's network
4. Launch app, select vehicle model/year
5. Configure connection settings
6. Tap 'Connect'

Note: 2007/older models and E46/E39/E83/E53 series require K+D-CAN cable and only support engine ECU diagnostics.

Version 3.7.6-L updates:

• Added diesel idle speed calibration
• Enhanced throttle body control
• General performance improvements

Auto & Vehicles